Heat Exchange at the Ice/Water Interface on Flowing Water
Any time the water flowing under an ice cover has a temperature above freezing, there is an exchange of heat between the water and the ice. Earlier work by Ashton and others provided adequate...

Application of Discrete Feature Analysis to Repository Characterization
Rock mass heterogeneity plays an important role in the hydrologic and mechanical behavior of radioactive waste repositories. This heterogeneity is, in turn, strongly influenced by the...

Nondestructive Testing Using Borehole and Surface Seismic Techniques to Evaluate Rock Mass Damage Zones
A suite of seismic tests was performed at the U12g tunnel at the Nevada Test Site. The methods include borehole (crosshole and downhole) and surface (Rayleigh wave and refraction) tests....

Key Scientific Issues for Near-Field Performance Assessment
This paper reviews key scientific issues related to the performance assessment of engineered barrier systems. In contrast to the inherent uncertainties associated with inhomogeneous geologic...

Near-Field Transport of Radioactive Chains
Much attention has been given to predicting the near-field mass transfer of a single radioactive species from a waste solid into surrounding porous material, but only limited consideration...

Risk Assessments for the Design of Subsurface Openings
A probabilistic approach was introduced to assess the risk of structural instability due to rock joint systems in rock mass, where subsurface openings are excavated, such openings as shafts,...

An Analysis of Buffering in Bentonite-Groundwater Systems
Chemical buffering by bentonite can potentially simplify assessments of the performance of engineered barriers to radionuclide migration by decoupling near-field and far-field geochemical...

Emplacement Drift Temperature Reduction by Cooling Enhancement and Ventilation
The application of cooling enhancement in a short vertical container emplacement layout is analyzed. Two 25 m-long heat pipes upward oriented at 45 degrees are installed at each emplacement...

Three-Dimensional Thermal Analysis for Temperature Distribution in Geological Formation
A three-dimensional conduction heat transfer program has been developed for use on microcomputer for thermal analysis of a conductive medium subject to, finite length heat sources. The...

The Constructive Use of Heat in an Unsaturated Tuff Repository
By designing the engineered barrier system in an unsaturated tuff repository to constructively use heat, the waste containers can be kept dry for hundreds of years. Without water, the...

A Proposed Regulatory Guide Basis for Spent Fuel Decay Heat
A proposed revision to Regulatory Guide 3.54, 'Spent Fuel Heat Generation in an Independent Spent Fuel Storage Installation' has been developed for the U.S. Nuclear...

p-Version Three Dimensional Solid Element for Heat Conduction
This paper presents a finite element formulation for a three dimensional twenty-seven node hierarchical solid element for heat condition where the element temperature approximation can...

Finite Element Approximation to Heat Transfer Through Construction Glass Blocks
The purpose of this study is to investigate the heat transfer through combined solid and fluid media, taking into account the interaction between the solid and the fluid. The main example...

Models for Rock Mass Dynamics
The phenomenology of explosive effects in hard rocks is of interest to workers in the energy field, in the defense field, and in planetary science. The salient characteristic of hard rock...

Use of a Tie-Back Retaining Wall to Stabilize a Moving Landslide
After failure of a gravity retaining wall, a moving landslide was stopped and stabilized by a tie-back retaining wall. The design considered the active landslide and residual strength...

Anoxic-Aerobic Activated Sludge Treatment
An activated sludge system was operated at a relatively low SRT of 1-2 days at the City of Phoenix to meet secondary treatment requirements. Operating MLSS concentrations were 400-600...

Influence of Moisture Influx on the Hygro-thermal Performance of a Clay Buffer Developed for Nuclear Disposal Vault
This paper focusses on an experimental study that investigates the heat transfer and moisture movement within a bentonite clay buffer compacted in a borehole located in a granite block....

Stability Analysis of Gravity Dam Foundations with Horizontal Seams
Determination of the overall factor of safety against sliding is an important aspect in concrete dam design. Limit equilibrium methods have serious limitations. A method for determining...

UCD Drag Plate Lysimeter?Momentum and Mass Transfers
The second large (6.1 m dia., 0.97 m deep) lysimeter built at the University of California, Davis (UCD) was largely the brainchild of Dr. F.A. Brooks, the initial Project leader of a U.S....

Practical Technology Resulting from MADE Research
As is often the case, when theoretical research is performed, practical technology is developed in the process. This has occurred with the Macrodispersion Experiment (MADE) conducted at...

 

 

 

 

Return to search